Opti-Free PureMoist MPDS 300.00 Milliliter

Optifree Puremoist MPDS

Optifree Puremoist evermoist
OPTI-FREE® PureMoist® provides 16 hours of moisture from insertion until the end of the day. You can rely on your contact lenses.

Use
For cleaning, disinfecting and storing all types of soft contact lenses.

Directions for use
For cleaning, disinfecting and removing proteins from your contact lenses: Thoroughly wet both sides of the lens with opti-free puremoist solution. Rub the lens clean for 20 seconds. Rinse each side of the lens for 10 seconds with a steady stream of opti-free puremoist solution. Fill your lens case with fresh opti-free puremoist solution. Keep the lenses in the closed lens case overnight or for at least 6 hours. If the lenses are still cloudy, rinse them with opti-free puremoist solution before inserting them. You can store your lenses for 30 days in a closed lens case; after 30 days, the lenses must be rinsed again.

Warnings
Do not use if the tamper-evident seal is damaged or missing.
Do not use if the packaging is open or damaged.
Not for use with heat disinfection (thermal disinfection).
Discard any remaining fluid in the lens case after disinfecting.
Never reuse fluid.

Storage advice
Store at room temperature. Keep out of reach of children.

Medical device. Read the leaflet before use.

Responsible for marketing
Alcon Nederland BV