Mycosan One-off Wart Freezer 50.00 Milliliters

Mycosan One-off wart freezing

Mycosan wart freezing
- Wart-free in 1 go!*

FAST:
Mycosan One-Off Wart Freezing is quick to use because the applicator does not need to be assembled; ready for use directly from the package.

EFFECTIVE:
Professional freezing performance: freezes the wart in just one application.

SAFE:
Contains a unique applicator with a Precision Point that targets only the (foot) wart. No direct contact between gas and skin.

*When applied by an adult

Usage
Effectively & quickly removes warts with one freezing!

Directions for use
INSTRUCTIONS FOR USE FOR COMMON WARTS 1. Place the actuator on the aerosol can, with the metal tip facing upwards, and align the markings. Do not press the actuator down until just before use to cool. 2. Place the aerosol can on a hard surface and press the white actuator for 5 seconds. Then let the aerosol can rest for 5 seconds. Be careful and avoid contact with the metal tip when pressing the actuator down. 3. Remove the actuator from the aerosol can, with the metal tip facing upwards. 4. Hold the metal tip on the wart for 20 seconds or less, depending on the size of the wart. Make sure the metal tip covers as much of the wart as possible. 5. Wash hands (except the treated area) immediately after use. 6. If the actuator is used by more than one person and/or after each application, clean with some alcohol on a wipe. It is important to follow the instructions in the manual exactly. Careless use can lead to too deep freezing, which can cause permanent damage to the upper skin layer on fingers and toes. This can lead to permanent scars or nerve damage. 6. INSTRUCTIONS FOR USE FOR VERUCAS 1. Soak the foot with the wart in warm water for 5 minutes. Dry thoroughly. File the area around the wart with a pumice stone or pumice file (not included in the Mycosan One-Off Wart Freezing package) before applying the product. 2. Place the actuator on the aerosol can, with the metal tip facing upwards. Do not press the actuator down until it is ready to cool. 3. Place the aerosol can on a hard surface and press the white actuator for 5 seconds. Then let the aerosol can rest for 5 seconds. Be careful and avoid contact with the metal tip when pressing the actuator down. 4. Remove the actuator from the aerosol can, with the metal tip facing upwards.  5. Hold the metal tip on the wart for 40 seconds. Make sure the metal tip covers as much of the wart as possible. 6. Wash hands (except the treated area) immediately after use. 7. If the actuator is used by more than one person and/or after each application, clean with some alcohol on a wipe.

Warnings
It is important to follow the instructions in the manual exactly. Careless use can lead to too deep freezing, which can cause permanent damage to the upper skin layer on fingers and toes.
This can lead to permanent scars or nerve damage.

Storage advice
Store sealed, out of reach of children.

Medical device. Read the leaflet before use.

Responsible for marketing
OTC Health & Beauty