Microlife Non-contact thermometer NC200 1 Piece

Microlife Non-contact thermometer NC200

This Microlife thermometer is a high-quality product featuring the latest technology and tested to international standards. Its unique technology allows it to deliver stable readings free from heat interference with every measurement. Each time the thermometer is turned on, it automatically performs a self-test to ensure measurement accuracy.

This thermometer has been clinically tested and found to be safe and accurate when used in accordance with
with its instructions for use.

Technical specifications
Type: Custom mode non-contact thermometer NC 200
Mode type: Adjustable mode
Measurement site: Forehead
Reference to body site: Under the tongue
Measuring range: Body mode: 34.0 - 43.0 °C / 93.2 - 109.4 °F
Object mode: 0.1 - 99.9 °C / 32.2 - 211.8 °F
Resolution: 0.1 °C / °F
Storage conditions: -25 - +55 °C / -13 - +131 °F
15 - 95 % maximum relative humidity
Auto power off: Approximately 1 minute after last measurement.
Battery: 2 x 1.5V alkaline batteries; type AAA
Battery life: approximately 2000 measurements (with new batteries)
Dimensions: 156.7 x 43 x 47 mm
Weight: 91.5g (with battery), 68.5g (without battery)
IP Class: IP22
Reference to
standards: ISO 80601-2-56; IEC 60601-1; IEC 60601-1-2 (EMC)
Expected lifespan: 5 years or 12,000 measurements
- Measure in seconds
- The innovative infrared technology allows a measurement to be completed without contact with the body. This guarantees
a safe and hygienic measurement within seconds.
- Automatic measurement with distance control
This device can automatically perform a measurement when the
desired distance within 5 cm is reached.
- Multiple applications (large measuring range)
This thermometer has a wide measuring range of 0.1 - 99.9 °C /
32.2 - 211.8 °F; the thermometer can be used to measure the
to measure body temperature, but can also be used
for measuring the surface temperature of:
- Milk in a baby's bottle
-The water in a baby's bath
- The ambient temperature

Accurate and reliable
The unique probe head with built-in advanced infrared sensor ensures that every measurement is accurate and reliable.

User-friendly and easy to use
- The ergonomic design makes the thermometer handy and easy to use.
- This thermometer can even be used on a sleeping child, who can sleep peacefully.
- This thermometer is fast and therefore pleasant to use for children.
- Read back multiple measurements
- Users can view the last 30 measurements by turning on the memory mode. This allows you to easily
follow temperature variations.

Safe and hygienic
- No direct contact with skin.
- No risk of broken glass or mercury ingestion.
- Completely safe for children.

Fever alarm
- 10 short beeps and a red illuminated LCD alert you when a temperature above 37.5 °C has been measured.
- Tracking system for self-measurement
- A green light on the back shows the user when the correct distance has been reached and a measurement is taken automatically.

What is this medicine used for?
The Microlife thermometer is designed to measure and monitor human body temperature.

Directions for use
Take your temperature with this thermometer
The thermometer measures infrared radiation emitted by the forehead or other objects. This energy is captured by the lens and converted into a temperature value.

Control screen and symbols
All symbols appear 9: Press the START/IO button to activate the thermometer, all symbols will appear on the display for 1 second.
Ready for measurement AT: When the thermometer is ready for measurement, the “°C” or “°F” symbol will continue to flash, while the body or object symbol remains displayed.
Countdown before BR measurement: A 3-second countdown is shown on the display (3, 2, 1) before each measurement.
Measurement Complete AK: The measurement will be shown on display 4 with both the ear or forehead symbol and the symbol for «°C» or «°F» remaining displayed.
As soon as the "°C" or "°F" symbol flashes again, the device is ready for the next measurement
Low Battery ON: When the thermometer is turned on, the icon will keep flashing to remind you that the batteries need to be replaced.

Setting date, time and beeper functions
Setting the date and time
After the batteries are installed, the year will flash in the display BO. You can set the year by pressing the M button 5. To confirm and then set the month,
To set, press the MODE button 6.
Now you can set the month with the M button 5. Press the MODE button 6 to confirm and then set the day.
Follow the instructions as described above to set the day, hours and minutes.
Once you have set the minutes and press the START/IO button 7, the date and time are set and the time is displayed
If no key is pressed for 20 seconds, the thermometer automatically switches to the ready-to-use mode AT.
End time setup: Press the START/IO button 7 during time setup. The date/time symbol with "--:--" will appear on the LCD screen. Then press the START/IO button 7 to start the measurement. If you do not do anything else, the thermometer will automatically turn off after 30 seconds.
turn off.
Change the current date and time: Press and hold the MODE button 6 for 8 seconds until the year starts flashing BO. You can now enter the new data as described above.

Setting the beeper
Press and hold the MODE button 6 for 3 seconds to set the BP beeper.
Press the M button 5 to turn the beeper on or off. The beeper is activated when the BP sound symbol appears without a cross.
When the beeper setting is selected, press the START/IO button 7 for the "ready for measurement" mode; otherwise, the device will automatically be ready for measurement after 10 seconds.

Switching from body mode to object mode
Press the START/IO button 7. All symbols will appear on the display 4 for 1 second.
The default mode is object mode AL. Press the MODE button 6 to switch to AM mode. To switch back to body mode, press the MODE button again.

Instructions for use
Always remove the protective cap BS before use.
Measure in body mode with automatic measurement and distance control
1. Press the START/IO button 7. All symbols will appear on the display 4 for 1 second.
2. A flashing °C/°F symbol, a flashing blue tracer light 2, and a beep indicate that the device is ready for an AT measurement.
3. Remove hair, sweat or dirt from the forehead to prevent inaccurate measurements.
4. Point the thermometer at the center of the forehead, keeping a distance of no more than 5 cm from the forehead.
5. The device will start automatically when the measuring sensor 1 detects the required distance of less than 5 cm. The display will show a countdown (3, 2, 1); after 3 seconds, a long beep will indicate that the measurement is complete.
6. Self-measurement: The self-measurement light 3 will help indicate when the measurement starts. Hold the thermometer to your forehead until the light turns off.
7. Read the measured temperature from the LCD display.
8. For a follow-up measurement, hold the thermometer away from your forehead and wait until the °C/°F symbol flashes again. Continue with steps 4-5 above.
9. Press and hold the START/IO button 7 for 3 seconds to turn it off; otherwise, the device will automatically turn off after 60 seconds.
Measuring in object mode without automatic measuring 1. Press the START/IO button 7. All symbols appear on the display 4 for 1 second.
2. Press the MODE button 6 to switch to object mode.
3. A flashing °C/°F symbol, a flashing blue tracer light 2 and a beep signal indicate that the device is ready for an AT measurement.
4. Point the thermometer at the center of the object you wish to measure, no more than 5 cm away. Now press the START/IO button 7. After 3 seconds, a long beep will indicate that the measurement is complete.
5. Read the measured temperature from the LCD display.
6. For a subsequent measurement, wait until the °C/°F symbol flashes again. Continue with steps 4-5 above.
7. Press and hold the START/IO button 7 for 3 seconds to turn it off; otherwise, the device will automatically turn off after 60 seconds.
Patients and thermometer should remain in a room with a constant temperature for at least 30 minutes.
Do not measure during or immediately after feeding a baby.
Do not use the thermometer in rooms with excessive humidity.
Patients should not drink, eat, or exercise before/during measurement.
Do not remove the measuring device from the measuring area until you hear the end beep.
10 short beeps and a red illuminated LCD alert you that a temperature above 37.5 °C has been measured.
Always take the temperature in the same place, as temperature readings may vary from place to place.
differences.
Doctors recommend taking newborns' temperatures rectally during the first 6 months, as other methods can often lead to unreliable results. If you still want to perform a non-contact temperature measurement on newborns, verify this with a rectal measurement.
In the following circumstances it is recommended to take three measurements and take the highest result:
Children under three years of age with a deficient immune system and in whom the presence or absence of fever is critical.
When the user is first learning to use the thermometer, until he/she is familiar with the device and obtains regular results.
If the measurement is unexpectedly low.
Temperature measurements should not be compared with each other because body temperature can
fluctuate with time and ambient temperature, often body temperature is highest in the evening and lowest in the morning hours.

Normal body temperatures are:
Armpit: 34.7 - 37.3 °C / 94.5 - 99.1 °F
Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F
Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F
Microlife NC 200: 35.4 - 37.4 °C / 95.7 - 99.3 °F

8. Switchable from Celsius to Fahrenheit
This thermometer displays temperature measurements in Fahrenheit and Celsius. To switch between °C and °F, press and hold the MODE button 6 for 3 seconds; the beeper symbol will appear on the display. Press the MODE button again; the current unit of measure ("°C" or "°F" symbol) will appear on the display AO. Switch between the units of measure (°C/°F) by pressing the M button 5. Once the unit of measure has been selected, press the START/IO button 7 to activate the "ready for measurement" mode; otherwise, the device will automatically switch off after 10 seconds AT.

9. Recalling 30 measurements in memory mode
This thermometer displays the last 30 measurements, including date and time.
AP Call Mode: Press the M button 5 to enter call mode when the device is off. The "M" memory icon flashes.
Result 1 – the last result AQ: Press the M button 5
and release it to see the latest result. Screen 1
only with memory symbol.
Pressing and releasing the M button 5 after the last 30 results have been called up will continue the above sequence with result 1.

10. Error messages
Measured temperature too high AR: The symbol "H" will
appear when the temperature is above 43°C / 109.4°F in
the body mode or 99.9 °C / 211.8 °F in object mode.
Measured temperature too low AS: The symbol "L" will
appear when the temperature is below 34 °C / 93.2 °F in the
body mode or 0.1 °C / 32.2 °F in object mode.

Ambient temperature too high BT: The symbol «AH» will appear when the ambient temperature is higher than
40.0 °C / 104.0 °F.
Ambient temperature too low BK: The symbol «AL» will appear when the ambient temperature is lower than 15.0
°C / 59.0 °F in Body mode or below 5.0 °C / 41.0 °F in Object mode.

Error in BL operation:
“Er 0” / “Er 6”: The system is not working properly.
Step 2: The device is placed directly on the forehead or object. Maintain a distance of 1-5 cm. Never touch the bottom (sensor area) of the measurement sensor.
Blank screen BM: Please check that the batteries are installed correctly. Also check the polarity (<+> and <->) of the batteries.
Low battery status BN: If only the icon is shown on the display, replace the batteries immediately.

11. Cleaning and disinfecting
Use a cotton swab or a cotton ball soaked in alcohol (70% isopropyl alcohol) to clean the thermometer housing and probe head. Be careful not to get any liquid inside the thermometer. Never use harsh cleaning agents, thinners, or benzene when cleaning, and never immerse the thermometer in water or any other liquid. Be careful not to scratch the surface of the probe lens or the display.

12. Battery Replacement
This instrument is supplied with two long-life 1.5V AAA batteries, which should be replaced immediately when only the BN symbol is displayed.
Remove the battery plate BQ by pushing in the direction shown.
Replace the batteries – check the correct polarity as shown by the symbols in the compartment.
Batteries and electronic instruments should be disposed of according to local regulations and not with household waste.

See the package insert for button markings and locations.

Ingredients
-

Warnings
Follow the instructions for proper use. This documentation provides you with important operating and safety instructions for this appliance. Read this documentation carefully before using the appliance and keep it for future reference.

This appliance may only be used for its intended purpose as described in the instructions for use. The manufacturer is not liable for damage caused by improper use.

Never immerse this appliance in water or other liquids. For cleaning, follow the instructions in the "Cleaning and Disinfecting" section.

Do not use the appliance if you suspect it is damaged or if you notice anything unusual during use.

Never open the appliance

A normal biological process called vasoconstriction can occur early in a fever, resulting in a lower skin surface temperature; the temperature measured with a thermometer may then be suspiciously low.

If the measurement result is not consistent with the patient's finding or is suspiciously low, repeat the measurement every 15 minutes or check the result with another core body temperature measurement.

This device contains sensitive components and must be handled with care. Follow the storage and operating instructions described in the "Technical Specifications" section!

Only allow children to use the appliance under adult supervision; small parts could be swallowed.

Do not use the device near strong electromagnetic fields, such as those from mobile phones or radios. Maintain a distance of at least 3.3 meters from such devices when using this device.

Protect it from:
- extreme temperatures
- shocks and drops
- pollution and dust
- direct sunlight
- heat and cold
- When the appliance is not going to be used for a longer period of time
the batteries must be removed

WARNING: The results measured with this device do not constitute a diagnosis. They do not replace consultation.
from a doctor, especially if the symptoms don't match. Don't rely solely on the measurement result; always consider other symptoms and the patient's feedback. If in doubt, always contact your doctor.

Other information
Medical device. Read the instructions for use before use.

Manufacturer / Distributor
Microlife AG ​​Swiss Corporation, Espenstrasse 139, 9443 Widnau, Switzerland