HG Wall & floor joint protector 250 Milliliter
€19,99
1
/
of
4
HG Wall & floor joint protector 250 Milliliter
HG Wall & floor joint protector 250 Milliliter
Regular price
€19,99 EUR
Regular price
€19,79 EUR
Sale price
€19,99 EUR
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Op voorraad
Bestel voor 16:00, donderdag in huis
Gratis verzending vanaf €50
Couldn't load pickup availability
HG Wall & floor joint protector
Many grout lines are porous and therefore easily absorb grease, dirt, and limescale. Spilling things like wine, soda, or something greasy on floor grout will cause stains that are very difficult to remove. Wall grout, especially in damp areas like bathrooms, will become dirty and unsightly due to mold and limescale.
Even during cleaning, water containing dirt from the floor or walls penetrates the grout. This gradually makes the grout dirty, making it difficult or impossible to clean. Fortunately, HG grout protector provides maximum, colorless, and transparent protection. 250ml is sufficient for approximately 30 to 40 m² of grout surface.
Compound
Contains: preservatives: Benzisothiazolinone, Methylisothiozolinone <5%.
Usage
How do you use HG wall and floor joint protector?
Follow the steps below for correct use of HG joint protector.
1. First clean the joints thoroughly with HG joint cleaner.
2. Rinse the joints with clean water and then let the joints dry thoroughly for 24 hours.
3. Allow new grout to fully cure and dry. For floor grout, apply HG wall and floor grout super protector using the included pipette. For grout on wall surfaces, such as those in kitchens or bathrooms, apply the product to the grout using a brush.
4. For both wall and floor joints, remove any excess product that comes onto the tiles with a cloth.
5. After 36 to 48 hours, the surface can be cleaned normally again. For floor grout, the floor can be walked on after approximately 3 hours. Shower floors can be used again after 8 hours.
Warnings
EUH208- Contains methylisothiazolinone. May cause an allergic reaction.
P101- If medical advice is needed, have product container or label at hand.
P102- Keep out of reach of children.
Manufacturer / Distributor
HG International BV, Oudweg 41, 1314 CJ Almere
Many grout lines are porous and therefore easily absorb grease, dirt, and limescale. Spilling things like wine, soda, or something greasy on floor grout will cause stains that are very difficult to remove. Wall grout, especially in damp areas like bathrooms, will become dirty and unsightly due to mold and limescale.
Even during cleaning, water containing dirt from the floor or walls penetrates the grout. This gradually makes the grout dirty, making it difficult or impossible to clean. Fortunately, HG grout protector provides maximum, colorless, and transparent protection. 250ml is sufficient for approximately 30 to 40 m² of grout surface.
Compound
Contains: preservatives: Benzisothiazolinone, Methylisothiozolinone <5%.
Usage
How do you use HG wall and floor joint protector?
Follow the steps below for correct use of HG joint protector.
1. First clean the joints thoroughly with HG joint cleaner.
2. Rinse the joints with clean water and then let the joints dry thoroughly for 24 hours.
3. Allow new grout to fully cure and dry. For floor grout, apply HG wall and floor grout super protector using the included pipette. For grout on wall surfaces, such as those in kitchens or bathrooms, apply the product to the grout using a brush.
4. For both wall and floor joints, remove any excess product that comes onto the tiles with a cloth.
5. After 36 to 48 hours, the surface can be cleaned normally again. For floor grout, the floor can be walked on after approximately 3 hours. Shower floors can be used again after 8 hours.
Warnings
EUH208- Contains methylisothiazolinone. May cause an allergic reaction.
P101- If medical advice is needed, have product container or label at hand.
P102- Keep out of reach of children.
Manufacturer / Distributor
HG International BV, Oudweg 41, 1314 CJ Almere
Share
