HG Joint Cleaner 500 Milliliter

HG Joint Cleaner
Cleaning grout? HG grout cleaner easily removes stubborn dirt from grout between wall and floor tiles. Ideal for cleaning grout in the bathroom or kitchen.
Due to the so-called buffered properties of this joint cleaner, the action remains active at the same power level during the contact time and after brushing, which will give an excellent result.

Compound
Contains: Anionic surfactants, non-ionic surfactants, phosphonates <5%

Usage
Follow the steps below for correct use of the HG joint cleaner.

1. Spray HG joint cleaner thoroughly onto the joints to be cleaned.
2. Allow the grout cleaner to work for a few minutes and then brush the grout with a brush.
3. Remove the loosened dirt with clean, lukewarm water and then let it dry.

Warnings
Transport and store bottle upright.
It is recommended to test this product in an inconspicuous area before use.
Not suitable for acid-sensitive or high-gloss surfaces or joints treated with high-gloss paint.
Not suitable for joints between calcareous tiles (marble etc.).
An optimal result will not always be obtained with silicone joints.

H314- Causes severe skin burns and eye damage.
P101- If medical advice is needed, have product container or label at hand.
P102- Keep out of reach of children.
P280- Wear protective gloves and eye protection.
P303+P361+P353- IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310- Immediately call a POISON CENTER or doctor/physician.
P501- Dispose of contents/container to hazardous or special waste collection point.
Contains: sodium hydroxide EINECS: 215-185-5.

Manufacturer / Distributor
HG International BV, PJ Oudweg 41, 1314 CJ Almere