HG Tile Cement Veil Remover 1 Liter
€12,08
1
/
of
4
HG Tile Cement Veil Remover 1 Liter
HG Tile Cement Veil Remover 1 Liter
Regular price
€12,08 EUR
Regular price
€11,96 EUR
Sale price
€12,08 EUR
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Op voorraad
Bestel voor 16:00, donderdag in huis
Gratis verzending vanaf €50
Couldn't load pickup availability
HG Tile cement residue remover
Removing cement residue? The unique feature of this cement residue remover is that it dissolves the cement from the tile surface, but not the cement from the grout. It even strengthens the grout. It's also suitable for removing rust.
Compound
Includes: Non-ionic surfactants <5%, perfumes.
Usage
Follow the steps below for correct use of HG tile cement residue remover (product 11).
1. Dissolve HG tile cement residue remover in water.
2. Pre-wet the surface to be treated with clean water.
3. Apply the solution liberally using a mop or cloth. Do not treat more than 10 to 15 square meters at a time.
4. Scrub the surface thoroughly with a scrubber or brush. Let it sit for 15 to 20 minutes, keeping the floor wet with the product solution during this time.
5. Then scrub the treated surface thoroughly again.
6. Remove the solution with a mop and then mop the floor with clean water.
Consumption: ±20-50 m2 depending on the dilution and the intensity of the cement veil.
Warnings
Transport and store bottle upright.
DANGER H302- Harmful if swallowed.
H314- Causes severe skin burns and eye damage.
Contains: Phosphoric acid EINECS 231-633-2, Oxalic acid EINECS 205-634-3 and Isotridecanol, ethoxylated EINECS 931-137-2.
Manufacturer / Distributor
HG International BV, PJ Oudweg 41, 1314 CJ Almere
Removing cement residue? The unique feature of this cement residue remover is that it dissolves the cement from the tile surface, but not the cement from the grout. It even strengthens the grout. It's also suitable for removing rust.
Compound
Includes: Non-ionic surfactants <5%, perfumes.
Usage
Follow the steps below for correct use of HG tile cement residue remover (product 11).
1. Dissolve HG tile cement residue remover in water.
2. Pre-wet the surface to be treated with clean water.
3. Apply the solution liberally using a mop or cloth. Do not treat more than 10 to 15 square meters at a time.
4. Scrub the surface thoroughly with a scrubber or brush. Let it sit for 15 to 20 minutes, keeping the floor wet with the product solution during this time.
5. Then scrub the treated surface thoroughly again.
6. Remove the solution with a mop and then mop the floor with clean water.
Consumption: ±20-50 m2 depending on the dilution and the intensity of the cement veil.
Warnings
Transport and store bottle upright.
DANGER H302- Harmful if swallowed.
H314- Causes severe skin burns and eye damage.
Contains: Phosphoric acid EINECS 231-633-2, Oxalic acid EINECS 205-634-3 and Isotridecanol, ethoxylated EINECS 931-137-2.
Manufacturer / Distributor
HG International BV, PJ Oudweg 41, 1314 CJ Almere
Share
