HG Tile Protector 1 Liter

HG Tile Protector
The wafer-thin yet extremely strong protective film protects floor tiles from wear, scratches, and other damage. HG tile protector also enhances the color and texture of floor tiles. This protective film for floor tiles, flagstones, and slate also masks existing areas of wear and tear and provides anti-slip properties. One liter covers approximately 40m² per coat.

- Protects against the penetration of dirt, stains and wear
- For all types of floor tiles, paving stones and slate
- Gives a semi-gloss
- Very easy to apply

Compound
Contains: Preservatives: Benzisothiazolinone

Usage
Follow the steps below for correct use of HG tile protector (product 14). 40 m² of protective film is required per liter per coat.

1. Make sure the surface is completely clean and free of grease and dust.
2. The adhesive/mortar and grout of new floors must be fully cured and dry. This usually takes 4-6 weeks to dry.
3. Do not shake before use and apply preferably with a wax dispenser (see the neck label on the front of this bottle). Alternatively, a clean, lint-free cloth wrapped around a squeegee can be used. For coarse surfaces, use a paint roller (fur roller).
4. Pour the liquid onto the floor and spread it in straight lines in one direction. Do not twist or rub.
5. Once the product has dried (after approximately 40 minutes), a second coat can be applied at right angles to the first coat.

Warnings
Transport and store the bottle upright. Keep frost-free.
Only use this product indoors, not in damp areas such as bathrooms.

EUH208- Contains Triisobutyl phosphate, rosin, fumaric acid-treated, polymer with glycerol, ammonium salt. May produce an allergic reaction.
P101- If medical advice is needed, have product container or label at hand.
P102- Keep out of reach of children.

Manufacturer / Distributor
HG International BV, PJ Oudweg 41, 1314 CJ Almere