HG Mould Cleaner Foam Spray 500 Milliliter

HG Mould Cleaner Foam Spray
Biocide 14738N

HG mold remover foam spray instantly and easily destroys all mold, eliminating the nasty black stains. Mold, damp, or mildew stains are common in silicone joints between bathtubs and tiled walls, in shower enclosures, and in plaster. This foam spray version has a unique foam formula, which allows the foam to last longer and ensures better and longer-lasting action. Furthermore, the product has a less pungent odor, is even more effective at targeting the mold, and is less likely to splash.
HG mould cleaner foam spray destroys all mould instantly and easily, making the dirty black spots disappear.

Legal instructions for use
Permitted use is solely for combating mold (black deposits) in damp areas. Follow the instructions for use. This product is intended for non-professional use only.

Use biocides safely. Read the label and product information before use.

Compound
Sodium hypochlorite 4.2% (AS ACTIVE CHLORINE).

Dosage/use
If you have used the bottle before, there may be residues of the liquid left in the nozzle, which could affect its performance when reused. Therefore, we recommend that you always rinse the nozzle thoroughly with hot tap water before reuse, for example, through the vent holes on the side.
the side of the foam nozzle. The product has a bleaching effect; if in doubt, test it on an inconspicuous area first. Do not remove mold beforehand. Press the nipple on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and let it work for another 30 minutes. Clean the sprayed surface with water and a sponge. Wash elastic joints (e.g., silicone sealant) after approximately 30 minutes and spray again. After use, turn the nipple back a quarter turn (blocking position). For cleaning large surfaces with green deposits, we recommend HG "green deposit cleaner".
Consumption: 2-3 m2 wall surface, 6-8 m2 tile joints

Special hazards
H290- May be corrosive to metals.
H314- Causes severe skin burns and eye damage.
H410- Very toxic to aquatic life with long lasting effects.
EUH031- Contact with acids liberates toxic gas.
EUH071- Corrosive to respiratory tract.
EUH206 - Caution! Do not use in combination with other products. May release hazardous gases (chlorine).
P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children.
P264- Wash hands thoroughly after handling.
P280- Wear protective gloves and eye protection.
P301+P330+P331- IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353+P310- IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Get immediate medical advice/attention.
P305+P351+P338+P310- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention.
P405- Store locked up.
P501 - Dispose of contents/container to hazardous or special waste collection point

Warnings
It is recommended to ventilate well during use and wear rubber/plastic gloves. Avoid splashing on clothing; (high) gloss paint and slats. Rinse immediately with water in case of contact. Avoid contact with metals, such as prints on decorative trim, aluminum, and stainless steel. Do not treat colored surfaces. We do not recommend using this product on (spack) spray-painted ceilings.
After use, some permanent brown spots may sometimes appear on light elastic joints (e.g. silicone sealant).
Discoloration may occur. Brown discoloration may occur on poorly glazed tiles and old tiles with hairline cracks. This brown discoloration can be removed with Hypo (sodium thiosulfate). The bottle must not be reused. Transport and store in a cool, dark, upright location. Best before: See
Bottom of bottle. Store at 20°C in the dark. Shelf life is longer at lower temperatures.