HG Mould Moisture Stain Remover 500 Milliliter
€9,99
1
/
of
0
HG Mould Moisture Stain Remover 500 Milliliter
HG Mould Moisture Stain Remover 500 Milliliter
Regular price
€9,99 EUR
Regular price
€9,99 EUR
Sale price
€9,99 EUR
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Op voorraad
Bestel voor 16:00, donderdag in huis
Gratis verzending vanaf €50
Couldn't load pickup availability
HG Mould Moisture Stain Remover
Biocide 9793N
HG mold, damp & weather stain remover
HG mold, damp & weather stain remover instantly destroys mold in damp places, both indoors and outdoors. For cleaning tiled walls (also suitable for marble) and grout in bathrooms, showers, toilets, kitchens, cellars, basements, saunas, swimming pools, garages, and sheds. It also cleans facades, balconies, planters, garden statues, and more. HG mold, damp & weather stain remover bleaches gray and black moldy areas.
Legal instructions for use
Permitted use is solely for combating mold (black deposits) in damp areas. Follow the instructions for use. This product is intended for non-professional use only.
Use biocides safely. Read the label and product information before use.
Compound
Active substance and content: Sodium hypochlorite 49g/liter (as active chlorine) Contains anionic surfactants: <5%
Dosage/use
Remove the lock before use. This product has a bleaching effect; if in doubt, test it on an inconspicuous area first. Do not remove mold beforehand. Press the nipple on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and let it work for another 30 minutes. Clean the sprayed surface with water and a sponge.
Rinse elastic joints (e.g., silicone sealant) after approximately 30 minutes and spray again. After use, turn the nipple back a quarter turn (locking position).
Consumption: 2-3m2 wall surface, 6-8m2 tile joints.
Special hazards
H315- Causes skin irritation.
H319- Causes serious eye irritation.
H400- Very toxic to aquatic life.
EUH206 - Caution! Do not use in combination with other products. May release hazardous gases (chlorine).
P101 - If advice is needed, have product container or label at hand. P102 - Keep out of reach of children.
P264- Wash hands thoroughly after handling this product.
P273- Avoid release to the environment.
P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes.
for several minutes; remove contact lenses, if possible; continue rinsing.
P337+P313- If eye irritation persists: Get medical advice/attention.
Safety recommendations
Transport and store in a cool, dark and upright place.
Warnings
It is recommended to ventilate well during use and wear rubber/plastic gloves. Avoid splashing on clothing, paintwork, plastic shower trays, and slats. Rinse immediately with water in case of contact.
Avoid contact with metals such as prints on decorative trim, aluminum, and stainless steel. Do not treat colored surfaces. We do not recommend using this product on ceilings. After use, some permanent brown discoloration may sometimes occur in light, elastic joints (e.g., silicone sealant). Brown discoloration may occur on poorly glazed tiles and old tiles with hairline cracks. This brown discoloration can be removed with Hypo (sodium thiosulfate), available upon request from the HG consumer service department. The bottle must not be reused.
Biocide 9793N
HG mold, damp & weather stain remover
HG mold, damp & weather stain remover instantly destroys mold in damp places, both indoors and outdoors. For cleaning tiled walls (also suitable for marble) and grout in bathrooms, showers, toilets, kitchens, cellars, basements, saunas, swimming pools, garages, and sheds. It also cleans facades, balconies, planters, garden statues, and more. HG mold, damp & weather stain remover bleaches gray and black moldy areas.
Legal instructions for use
Permitted use is solely for combating mold (black deposits) in damp areas. Follow the instructions for use. This product is intended for non-professional use only.
Use biocides safely. Read the label and product information before use.
Compound
Active substance and content: Sodium hypochlorite 49g/liter (as active chlorine) Contains anionic surfactants: <5%
Dosage/use
Remove the lock before use. This product has a bleaching effect; if in doubt, test it on an inconspicuous area first. Do not remove mold beforehand. Press the nipple on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and let it work for another 30 minutes. Clean the sprayed surface with water and a sponge.
Rinse elastic joints (e.g., silicone sealant) after approximately 30 minutes and spray again. After use, turn the nipple back a quarter turn (locking position).
Consumption: 2-3m2 wall surface, 6-8m2 tile joints.
Special hazards
H315- Causes skin irritation.
H319- Causes serious eye irritation.
H400- Very toxic to aquatic life.
EUH206 - Caution! Do not use in combination with other products. May release hazardous gases (chlorine).
P101 - If advice is needed, have product container or label at hand. P102 - Keep out of reach of children.
P264- Wash hands thoroughly after handling this product.
P273- Avoid release to the environment.
P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes.
for several minutes; remove contact lenses, if possible; continue rinsing.
P337+P313- If eye irritation persists: Get medical advice/attention.
Safety recommendations
Transport and store in a cool, dark and upright place.
Warnings
It is recommended to ventilate well during use and wear rubber/plastic gloves. Avoid splashing on clothing, paintwork, plastic shower trays, and slats. Rinse immediately with water in case of contact.
Avoid contact with metals such as prints on decorative trim, aluminum, and stainless steel. Do not treat colored surfaces. We do not recommend using this product on ceilings. After use, some permanent brown discoloration may sometimes occur in light, elastic joints (e.g., silicone sealant). Brown discoloration may occur on poorly glazed tiles and old tiles with hairline cracks. This brown discoloration can be removed with Hypo (sodium thiosulfate), available upon request from the HG consumer service department. The bottle must not be reused.