HG Natural Stone Protector Shine 1 Liter
€20,62
1
/
of
4
HG Natural Stone Protector Shine 1 Liter
HG Natural Stone Protector Shine 1 Liter
Regular price
€20,62 EUR
Regular price
€20,42 EUR
Sale price
€20,62 EUR
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Op voorraad
Bestel voor 16:00, woensdag in huis
Gratis verzending vanaf €50
Couldn't load pickup availability
HG Natural Stone Protector Shine
HG natural stone protector is an easy-to-apply polymer emulsion. Once dry, this emulsion forms a glossy, wafer-thin, yet extremely strong protective film. Perfect for giving marble or natural stone a glossy finish.
Want to protect and polish your natural stone floor at the same time? This natural stone protector protects the top layer of the stone from wear and tear, damage, and corrosion by acids like soda and wine. This protective film for natural stone also provides anti-slip properties. One liter covers approximately 60 to 80 square meters per coat.
Compound
Includes: Phosphates <5% Preservatives: Benzisothiazolinone, methylisothiazolinone
Usage
Follow the steps below to protect your natural stone against wear and damage using HG natural stone protector (product 33):
1. The surface must be completely clean, free of grease and dust.
2. For even distribution, preferably use a wax spreader. Alternatively, a lint-free, clean (tea) towel wrapped around a squeegee can be used. On coarse surfaces, use a paint roller (fur roller), but avoid excessive foaming during application with the roller.
3. Dilute HG natural stone protector 1 to 1 with cold water.
4. Pour this natural stone protector solution over the floor and spread it in one direction over the natural stone floor using a wax spreader or roller.
5. After approximately 40 minutes, a second layer can be applied perpendicular to the first layer.
Warnings
H317- May cause an allergic skin reaction.
H319- Causes serious eye irritation.
P101- If medical advice is needed, have product container or label at hand.
P102- Keep out of reach of children.
P280- Wear protective gloves.
P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+P313- If skin irritation or rash occurs: Get medical advice/attention.
P501- Dispose of contents/container to hazardous or special waste collection point.
Contains: Colophonium, fumaric acid treated, polymer with glycerol, ammonium salt CAS: 68554-18-7.
Manufacturer / Distributor
HG International BV, PJ Oudweg 41, 1314 CJ Almere
HG natural stone protector is an easy-to-apply polymer emulsion. Once dry, this emulsion forms a glossy, wafer-thin, yet extremely strong protective film. Perfect for giving marble or natural stone a glossy finish.
Want to protect and polish your natural stone floor at the same time? This natural stone protector protects the top layer of the stone from wear and tear, damage, and corrosion by acids like soda and wine. This protective film for natural stone also provides anti-slip properties. One liter covers approximately 60 to 80 square meters per coat.
Compound
Includes: Phosphates <5% Preservatives: Benzisothiazolinone, methylisothiazolinone
Usage
Follow the steps below to protect your natural stone against wear and damage using HG natural stone protector (product 33):
1. The surface must be completely clean, free of grease and dust.
2. For even distribution, preferably use a wax spreader. Alternatively, a lint-free, clean (tea) towel wrapped around a squeegee can be used. On coarse surfaces, use a paint roller (fur roller), but avoid excessive foaming during application with the roller.
3. Dilute HG natural stone protector 1 to 1 with cold water.
4. Pour this natural stone protector solution over the floor and spread it in one direction over the natural stone floor using a wax spreader or roller.
5. After approximately 40 minutes, a second layer can be applied perpendicular to the first layer.
Warnings
H317- May cause an allergic skin reaction.
H319- Causes serious eye irritation.
P101- If medical advice is needed, have product container or label at hand.
P102- Keep out of reach of children.
P280- Wear protective gloves.
P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+P313- If skin irritation or rash occurs: Get medical advice/attention.
P501- Dispose of contents/container to hazardous or special waste collection point.
Contains: Colophonium, fumaric acid treated, polymer with glycerol, ammonium salt CAS: 68554-18-7.
Manufacturer / Distributor
HG International BV, PJ Oudweg 41, 1314 CJ Almere
Share
