HG Wood floor oil Because HG wood floor oil has the unique property of hardening once it penetrates the wood, it acquires a completely natural look. It also protects the floor against dirt, stains, and drying out. The floor oil is made with natural oils and is 100% solvent-free.
Usage Follow the steps below to protect wooden floors against dirt, stains and drying out with HG wood floor oil (product 60):
1. Shake the product well before use and then apply HG wood floor oil thinly to the wooden floor.
2. Rub this immediately with a clean, lint-free (tea) cloth, so that the oil is completely absorbed by the wood. 3. Do this 1 or 2 times, until the wood is saturated and no longer absorbs the oil. 4. Immediately remove any excess oil. 5. After a few hours, the floor can be carefully walked on again. 6. After 24 hours, the oil has fully hardened into the wooden floor and can be walked on normally. 7. 3 days after treatment, the wood is optimally protected.
Warnings Transport and store bottle upright. Absorbent materials (rags, etc.) that have come into contact with this product may ignite during drying due to self-heating. Therefore, spread out the materials and allow them to air dry. Alternatively, you can seal the used materials in an airtight bag after thoroughly saturating them with water before disposing of them. Due to the potential for self-heating, the use of spongy materials is not recommended.
EUH208- Contains clove oil. May cause an allergic reaction. P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children.
Manufacturer / Distributor HG International BV,
PJ Oudweg 41,
1314 CJ Almere