HG Eco stain pre-treatment 500.00 Milliliters

HG Eco stain pre-treatment

HG eco stain pre-treatment is a powerful eco stain spray, enriched with active oxygen. This allows this ecological stain spray for clothing to remove even the most stubborn stains, even at lower temperatures. This product contains no chlorine or optical brighteners. The special formula in this handy eco pre-treatment is suitable for almost all types of textiles. HG eco stain pre-treatment is a sustainable stain remover, made from raw materials that are less harmful to the environment. HG eco-products are therefore free of preservatives, phosphates, dyes, and microplastics.

- Packaging made from 100% recyclable materials.
- Free of preservatives, phosphates, dyes, and microplastics.
- Enhanced with active oxygen.
- Contains no chlorine or optical brighteners.

Suitable for almost all types of textiles.

Ingredients
Contains, among others: Non-ionic surfactants, anionic surfactants, amphoteric surfactants, phosphonates <5%

Usage
Turn the nozzle on the front a quarter turn. If you have used the bottle before, liquid residues may have remained in the spray opening, which could cause it to function less effectively upon reuse. We therefore advise you to always rinse the spray opening thoroughly with hot tap water before reuse, for example via the ventilation holes on the side of the foam tube. For coloured textiles, first test for colourfastness (see attention). Spray the product liberally onto the stains and spots until they are completely covered. Massage the product into the stains by rubbing fabric on fabric. Allow the product to work for a maximum of 5 minutes, but prevent it from drying out. Immediately wash the treated laundry in the washing machine on a main wash program and add main detergent. When washing by hand, add detergent to the water. After use, turn the nozzle a quarter turn again (OFF). Always wash your hands immediately after use or wear household gloves. Do not use on leather, wool, silk, and other delicate textiles. Only use on colourfast textiles. If in doubt, check each individual colour of the textile for colourfastness on an inconspicuous area before use (e.g., the inside of a hem). Do this by letting the product work for a few minutes, rinsing the product thoroughly with water, and then letting the fabric dry. Avoid direct contact with metal elements (zippers, buttons) or rust stains. Never let the product work for longer than 5 minutes and do not let it dry out. Do not expose pre-treated laundry to direct sunlight. Do not mix with other products (such as chlorine bleach) during pre-treatment.

Warnings
Transport and store the bottle upright. Store frost-free.

Manufacturer / Distributor
HG International BV